+90 232 877 12 11
   CALL US !    BEYDEMİR

SAND BLASTING MACHINE

TUMBLE SAND BLASTING MACHINE

 RUBBER BELT TUMBLE SAND BLASTING MACHINE


 CABIN


Laser cut, sheet metal construction. Side tumbles are plated with 12 mangan steel sheet metal. The steel shot is  sealed. Tumble volume is 0,12 m3 and the diameter is 700 mm. maximum load at one charge should be maximum 300 kgs. There are metal sensitive switches on the door and loading chamber for safety purposes.



TURBINE


There are 6 between two disks in blasting turbine. The engine has a power of 10 HP 3000 c/min. the engine is connected directly to the turbine with flange. Thus, power loss in minimized.



ELEVATOR


The elevator has rubber belts that connects the sand can.



ROTATING SCREEN SEPARATOR

The sand – dust and scale mix, carried to the upper chamber of the machine with the elevator, is transferred to the tribune after being cleaned in the separator. Unwanted articles are discharged through the pipe underneath the separator. Larger pieces are discharged through the pipe before the separator.



 FILTER


 A wet filter system shall be delivered with the machine. This system is more advantageous compared to dust separator, dry filter systems. The wet should be preferred especially against fire risk. The machine has a filter system that filters not only the machine but also its surrounding, which is another advantage of this system. With its 4 HP 3000 c/min power fan, the system provides a very powerful suction.   


DUST PIPES AND THE CYCLONE

The pipes are set according to the fan power. There are flaps on them. The large and unwanted articles are discharged from the system through the expansion tank.


 PANEL

High quality branded panels are used to protect all engines of the system. There are ammeter and voltmeter for the tribune engine. Operating times are time adjusted. When the operation ends, an audible warning system and a warning light are activated. The flaps are automatically opened after the star delta starting of the tribune and closed automatically when the operation ends to stop the engine. 

gallery order

ROTATING TABLE SAND BLASTING MACHINE

 FEATURES OF ROTATING TABLE SAND BLASTING MACHINE


01- IT HAS A DRY SAND SEPARATOR FEATURE
5,5HP 3000 D/DK. 380 V MOTOR / 5,5HP 3000 C/MIN. 380 V ENGINE

 POWERFUL SUCTION CONVEYS THE DUST AND SCALE ON THE BLASTED MATERIAL TO THE SAND SEPARATOR FILTER AND THEY ARE KEPT HERE 

 
02- IT HAS DUAL TRIBUNE (SAND BLASTING)

a. EACH TRIBUNE HAS A 5,5 HP 3000 C/MIN. 380V ENGINE.


b.  THE TRIBUNES ARE PLACED RANDOMLY. THE STEEL SHOTS SPILLED FROM THE UPPER SAND CHAMBER ARE BLASTED ON THE MATERIAL ON THE ROTATING TABLE WITH TRIBUNE ENGINES.

 
 03-IT HAS AN ELEVATOR SHOT TRANSFER – COLLECTING SYSTEM. THE STEEL SHOTS SPILLED FROM THE TRIBUNES ARE COLLECTED BY THE ELEVATOR CANS LOCATED IN THE BODY OF THE MACHINEAND PULLED UP TO THE UPPER SAND CHAMBER. 
 
04- WHEN THE OPERATION ENDS, A ROTATING SIGNAL WARNING IS ACTIVATED (AUDIO AND FLASHING SIGNAL)
 
05-  IT HAS AN AUTOMATED TIME LIMIT RELAY. ALL THE ENGINES OF THE MACHINE COME TO A FULL STOP WHEN THE OPERATION ENDS.


06-  THE DIAMETER IF THE ROTATING TABLE IS 1800 mm.

gallery order

CONVEYOR SAND BLASTING

FEATURES OF THE CONVEYOR SAND BLASTING MACHINE


01- IT HAS A WET DUST SEPARATOR SYSTEM.

5,5HP 3000 D/DK. 380 V MOTOR / 5,5HP 3000 C7MIN. 380 V ENGINE


 POWERFUL SUCTION CONVEYS THE DUST AND SCALE ON THE BLASTED MATERIAL TO THE FILTER AND THEY ARE KEPT HERE

 
02-  IT HAS DUAL TRIBUNE (SAND BLASTING)

a. EACH TRIBUNE HAS A 5,5 HP 3000 C/MIN. 380V ENGINE.


b.THE TRIBUNES ARE PLACED RANDOMLY. THE STEEL SHOTS SPILLED FROM THE UPPER SAND CHAMBER ARE BLASTED ON THE MATERIAL ON THE CONVEYOR WITH THE TRIBUNE ENGINES.

 


03-IT HAS A CONVEYOR BELT SYSTEM

MAXIMUM WORK LOAD CAPACITY 2000 mm / minute

MACHINE LENGTH: 7000 mm
SCREEN AND BLASTING CHAMBER : 2000 mm
LENGTH OF LOADING BELT: 5000 mm

 LOADING : 1500 mm

UNLOADING: 1500 mm
 WIDTH OF BELT: 700 mm
K LOADING, UNLOADING AND EJECTING AT THE END OF OPERATION IS PERFORMED BY MEANS OF THE CONVEYOR BELT WITHOUT ANY NEED FOR EXTRA LABOR.
04-CONVEYOR BELT HAS CYCLE SETTING
CONVEYOR HAS SIX ROLLERS
THE BLASTING SPEED CAN BE CUSTOMIZED BY KEEPING THE CONVEYOR BELT SPEED UNDER CONTROL.

05- IT HAS A HELIX SHOT TRANSFER AND COLLECTING SYSTEM


THE STEEL SHOT SPILLED FROM THE TRIBUNES ARE COLLECTED BY THE HELIX LOCATED IN THE BODY OF THE MACHINE AND PULLED TO THE UPPER SAND CHAMBER BY ELEVATOR CANS. 

gallery order